Picicsavarkulcs

Testing...testing

Tervek

Banán csatlakozó

Bevezető

A banán csatlakozó a legegyszerűbb felépítésű egypólusú csatlakozófajta. Főként a méréstechnikában mérőzsinórokon, patch kábeleken, Hi-Fi rendszerekben erősítők, és hangfalak összeköttetésekor találkozhatunk vele. 1924-ben Richard Hirschmann fejlesztette ki. (former Richard Hirschmann GmbH&Co.).[citation needed]

Felépítés

The plug consists of a cylindrical metal pin about 25 mm (one inch) long, with a diameter of 4 mm, which can be inserted into a matching 4 mm socket to make an electrical contact. The pin has one or more lengthwise springs that bulge outwards slightly, giving the appearance of a banana. These press against the sides of the socket, improving the electrical contact and preventing the pin from falling out. The curved profile of these springs is probably the origin of the name "banana plug". The other end of the plug has a lug connector to which a length of flexible insulated equipment wire can be attached, which is either screwed, soldered, or crimped into place. An insulating plastic cover is usually fitted over this rear end of the connector. The rear end of a 4 mm plug often has a 4 mm hole drilled in it, either transversely or axially, or both, to accept the pin of another 4 mm plug. This type is called a "stackable" 4 mm plug. For high voltage use, a special sheathed version of the banana plug and socket is used. This version has an insulating sheath around both the male and female connectors to avoid accidental contact. The sheathed male plug will not work with an unsheathed female socket, but an unsheathed male plug will fit a sheathed female socket. Individual banana plugs and jacks are commonly color-coded red and black but are available in a wide variety of colors. Dual banana plugs are usually black with some physical feature such as a molded ridge or thick tab, marked "Gnd" indicating the relative polarity of the two plugs. Besides plugging into specific banana jacks, banana plugs may plug into five-way or universal binding posts on audio equipment.

Felhasználás

Forrasztással, csavarral, szokták a kábelvégre erősíteni.

Előnyök/Hátrányok

Elektromos szempontból nem a legkiválóbb. Mivel gyakorlatilag a csupasz vezeték végének csinosítása csak, ezért semmilyen érintésvédelemmel nincs ellátva. Persze olyan jelek átvezetésére használják leginkább, amelyek nem veszélyesek az emberi életre, de a sosem lehet tudni.